A8L Quattro Sedan W12-6.0L (BSB) (2005)
/Page-3014005.png)
‹› The (T40199) center the gasket and the oil pan. This assures optimal sealing.
-
Push the new gasket and oil pan over the (T40199).
-
Tighten the oil pan bolts in the following sequence: - 1 to 10 -.
-
Remove the 4 (T40199).
-
Install the remaining bolts in the following sequence: - 11 to 24 -.
-
Fill the ATF. Refer to => [ ATF, Draining or Filling after Repair ] See: Fluid - A/T/Service and Repair/ATF, Draining or Filling After Repair.
-
Install the crossmember - D -.
