Audi Workshop Service and Repair Manuals > A8L Quattro Sedan W12-6.0L (BSB) (2005) > Transmission and Drivetrain | Automatic Transmission/Transaxle | Front Final Drive, Automatic Transaxle <--> [Differential, Automatic Transaxle] | Front Final Drive Fluid <--> [Differential Fluid - A/T] | Component Information | Service and Repair | Front Final Drive, Transmissions With Separate Oil Systems, Filling After Repair

Page 2

‹› - a - = 13 mm

Position engine/transmission jack (V.A.G 1383 A) on bolt head and slightly raise transmission, as shown in illustration.

Remove the sound proofing bracket from underneath the ATF cooler.

If present, remove the electrical connector brackets - 1 - and - 2 - for the oxygen sensors from the tunnel crossmember - arrows -.

Mark the installed position of the transmission tunnel crossmember on the body.