A8L Quattro Sedan W12-6.0L (BSB) (2005)
Transmission Mount: Service and Repair
Tunnel Crossmember
Tunnel Crossmember
Special tools, testers and auxiliary items required
‹› Engine/Transmission Jack (V.A.G 1383 A)
‹› Bolt M12x100 with nut
Removing
-
Remove the vacuum hose between the air filter and the throttle valve unit.
-
Lift the vehicle.
-
Remove the crossmember - A - under the exhaust system.
-
Separate front exhaust pipes with catalytic converter from rear exhaust system - arrows - and tie up to side.
-
Remove the lower shield - B -.
-
Remove the air duct - 1 - from the transmission.
-
Remove the noise insulation - 2 - from underneath the engine/transmission.
-
Remove the driveshaft heat shield - 3 -.