A8L Quattro Sedan W12-6.0L (BSB) (2005)
-
Check the circlip for correct seating.
-
Before installing the cover, apply 60 grams of drive axle grease in CV joint through the ball paths.
Make sure you do not damage the sealant bead.
-
Align the cap using bolts - arrows - with the bolt holes.
It must be aligned exactly because it cannot be aligned after driving on.
-
Drive cover on using a plastic hammer.
-
Wipe away any sealant leaking out.
-
Apply 60 grams of joint grease to the CV joint through the ball paths.
-
Lubricate the contact surfaces for the gasket.
-
Remove the adhesive foil from gasket and adhere to the CV joint.