A8L Quattro Sedan W12-6.0L (BSB) (2005)
Installing the Inner Race/Large Tapered Roller Bearing
CAUTION!
Wear protective gloves.
-
Warm the inner race to approximately 100° C (212° F).
Installing the Outer Race/Large Tapered Roller Bearing
-
Lightly oil the bearing seat inside the rear axle housing.
-
Install the shim S3 for the pinion that was selected earlier.
The word oben (top) on the thrust pad (3253/4) faces the nut on the fitting tool.
Installing the Outer Race/Small Tapered Roller Bearing