A8L Quattro Sedan W12-6.0L (BSB) (2005)
/Page-3124001.png)
Seals and Gaskets: Service and Repair
Flange Shaft Oil Seals
Flange Shaft Oil Seals
Special tools, testers and auxiliary items required
‹› Drift (2062)
‹› Drip tray (V.A.G 1306/)
‹› Torque wrench (VAG1331)
‹› Torque wrench (VAG1332)
‹› Engine-/gearbox jack (V.A.G 1383/A) with universal mounting (V.A.G 1359/2)
Removing
-
Observe General repair instructions => [ General Repair Instructions ] See: Description and Operation/Rear Final Drive 01R (09EA Transmission)
.
‹› All the illustrations show the left-hand side of the final drive. Removal and installation of flange shaft and seal on the right-hand side is identical.
-
Remove rear section of exhaust system (rearward of exhaust pipe clamp(s)):
-
Remove bolts - arrows A and B - and remove cover.
-
Remove heat shields from final drive - arrows -.
