A8L Quattro Sedan W12-6.0L (BSB) (2005)
1
-
Shaft
2
-
Protective sleeves
3
-
End caps
4
-
Hose clamps
5
-
Clamps
-
Clamps face inwards on vehicles with long wheelbase (as shown in Fig.).
-
Clamps face outwards on vehicles with short wheelbase.
6
-
Penetrations in assembly mount
7
-
Rubber grommet
8
-
Guide tubes
9
-
Assembly mount
10
-
Retainer tabs
-
Remove bolts - 3 -.
-
Remove electric sun shade drive module - 1 - with guide tubes - 2 - from assembly mount - 4 -.
Installing
NOTE: New components: Remove electric sun shade drive module from packaging at both guide tubes at same time.
-
Slide electric sun shade drive module - 1 - with guide tubes - 2 - into assembly mount - 4 -.
-
Loosely install bolts - 3 -.
-
Turn assembly mount onto back.
-
Slip rubber grommets - 7 - (2x) over guide tubes - 8 -.
-
Press rubber grommets - 7 - (2x) into penetrations - 6 -.