A8L Quattro Sedan W12-6.0L (BSB) (2005)
-
Remove the spray nozzle. Refer to => [ Windshield Washer Nozzle, Removing and Installing, through 08.2007 ] See: Service and
Repair/Windshield Washer Nozzle, Removing and Installing, Through 08.2007.
-
Flush washer jet in the opposite direction of the spray flow with clean water.
-
To remove the rest of the contaminants, the washer nozzles may only be cleared with compressed air blowing opposite the direction of the spray.
-
If the spray field still does not correspond to the specifications, replace the washer nozzle.
Windshield Spray Nozzle, Adjusting, from 09.2007
-
Mark the 6 points on the windshield with a water-soluble pen:
Adjusting dimension:
‹› The adjustment dimensions give values for a driving vehicle, that is, when parked, the spray pattern will shift slightly.
-
Locate the points of the individual spray jets with the Windshield Washer Aiming Tool (T10127).
-
If the spray field does not match the specifications, clean uncleaned washer jets.
Cleaning washer nozzles:
-
Remove the spray nozzle. Refer to => [ Windshield Washer Nozzle, Removing and Installing, from 09.2007 ] See: Service and Repair/Windshield
Washer Nozzle, Removing and Installing, From 09.2007.
-
Flush washer nozzles in the opposite direction of the spray flow with clean water.
-
To remove the rest of the contaminants, the washer nozzles may only be cleared with compressed air blowing opposite the direction of the spray.
-
If the spray field still does not correspond to the specifications, replace the washer nozzles.