A8L Quattro Sedan W12-6.0L (BSB) (2005)
Wiper Arm: Removal and Replacement
Windshield Wiper Arms
Special tools, testers and auxiliary items required
‹› Windshield wiper arm tool set (T10369)
Removing
‹› If the windshield wiper motor is to be run during the work procedure, the hood must be closed, otherwise the voltage supply of the wiper motor
will be interrupted.
-
Switch on ignition.
-
Operate one-touch wiping and let wiper arms run to end position.
-
Switch off ignition and remove ignition key.
-
Pry off caps at wiper arms using a screwdriver.
-
Loosen nuts - arrows - several rotations.
-
Position the puller (T10369/1) on the wiper arm - 1 - as illustrated.
-
Position the thrust piece - 2 - on the wiper axle.
-
Rotate the bolt - 3 - clockwise until the wiper arm is removed from the axle.