Allroad Quattro V6-2.7L Turbo (APB) (2002)
/Page-2554008.png)
-
Similar screen appears:
The previous data in the ECM is erased and the new data is being transferred to the module from the flash CD.
Note:
Please do not carry out any other work on the vehicle during "Update - Programming". Process could be interrupted.
NOTE:
-
If, during the "Update - Programming", a fault message is displayed:
-
Confirm that VAS 5052 or VAS 5051 diagnostic tool power supply is adequate and that ALL appliances with high electromagnetic radiation
(i.e. mobile phones) are switched OFF.
-
The "Update - Programming" (flashing) process must then be started from the beginning using the "Repeat" button (arrow).
Once "Update - Programming" (flashing) is complete, the control module must be re-initialized.
