Allroad Quattro V6-2.7L Turbo (APB) (2002)
/Page-2697002.png)
-
Drive joint onto shaft using plastic hammer, until securing ring engages.
-
Introduce 40 gr. of drive axle grease into joint on lining side.
Close tensioning clamp
-
Grease outer constant velocity joint.
-
Vent CV boot.
-
Hook in tensioning clamp at first tab by hand.
-
Close hose ties using 3340 pliers
-
3340 pliers must be inserted at front of hose tie as depicted in illustration.
