Allroad Quattro V6-2.7L Turbo (BEL) (2003)
Power Seat Motor: Removal and Replacement
Lumbar Support Motor With Gears, Removing and Installing
Lumbar Support Motor With Gears, Removing And Installing
1
-
Lumbar support body
2
-
Foam pieces (2x)
-
If not available as a replacement part, detach foam pieces from old motor and attach to new motor.
3
-
Motor with gears and Bowden cable
-
Remove seat,
-
Remove 2-way lumbar support.
-
Cut cable ties - 5 - (2x).
-
Press lumbar support body together.
-
Pull Bowden cable - 6 - in direction of - arrow A -.