Cabriolet V6-2.8L (AFC) (1995)
/Page-462001.png)
Vibration Damper: Service and Repair
VIBRATION DAMPER
REMOVING
-
Remove ribbed belt.
NOTE: The center bolt does not have to be loosened to remove the vibration damper.
-
Remove 8 mounting bolts.
-
Remove vibration damper.
INSTALLING
-
When installing, make sure that notch (arrow) in vibration damper is aligned with tab on toothed belt sprocket.
Tightening torque: 25 Nm (18 ft. lbs.)