Cabriolet V6-2.8L (AFC) (1995)
Dimmer Switch: Service and Repair
-
Remove instrument cluster.
-
Remove hex nuts -4- with washers.
-
Remove instrument panel light dimmer switch -3-.
CAUTION!
-
When replacing the instrument panel light dimmer switch, make certain that the flat beveled surface on the adjuster fits exactly into the
adjustment pin.
-
If necessary, remove the adjustment pin and install on the dimmer switch before installing switch.
-
Install in reverse order of removal.
Bulb holders, removing and installing
Instrument cluster bulb identification. See: Instrument Cluster/Instrument Panel Bulb/Application and ID
-
Remove instrument cluster.
-
Rotate bulb holders counterclockwise approx. 900 (1/4 turn) and remove.
-
Install in reverse order of removal.