Alignment (Camber): Service and Repair
- Make
- Audi
- Model
- Cabriolet
- Engine
- V6-2.8L (AFC)
- Year
- 1995
- Section
- Service and Repair › Rear › Camber
MaintenanceCamber · page 1 of 2
/Page-275001.png)
Alignment: Service and Repair
Camber
Use only optical measuring equipment when checking and adjusting camber.
1. Loosen locknuts for ball joint bracket, then move ball joint using adjusting lever tool No. 3098, or equivalent, in slotted holes in control arm.
2. Tighten locknuts to specifications, then recheck camber and adjust if necessary.
3. Check toe, and adjust if necessary.
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 1995 Audi Cabriolet 2.8L
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Audi power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.