Cabriolet V6-2.8L (AFC) (1995)
![background image](/audi/cabriolet/v6-2.8l_(afc)/Page-317001.png)
Coolant Line/Hose: Service and Repair
NOTES:
^
The intake manifold must first be removed in order to remove the coolant pipes.
^
Always replace gaskets and seals.
1
Large coolant pipe
2
Bleed screw
-
15 Nm (11 ft. lbs.)
-
Filling system
3
Engine Coolant Temperature (ECT) sensor
-
15 Nm (11 ft. lbs.)
-
Checking. Refer to Repair Group 01
4
Bolt coolant pipe brackets
-
Tighten to: 10 Nm (7 ft. lbs.)
5
Small coolant pipe
6
Bolt intake manifold
-
Tighten to: 20 Nm (15 ft. lbs.)
7
Electronic ECT thermal switch
-
Checking. Refer to Electrical Equipment
-
Newer electronic version with 3 terminals replaces 4-terminal version; no change to wiring harness or connector required
8
Bolt Coolant pipe to cylinder head
-
Tighten to: 10 Nm (7 ft. lbs.)