Cabriolet V6-2.8L (AFC) (1995)
^
Install ground wire (3) from kit, part number 4A1 498 091, using new screw (4) and knurled bushing (5) also from the ground wire kit
-
Position the wire connector (with crimping downwards) in a 10-o'clock position and torque screw 7 +/- 1.5 Nm (62 in-lbs)
^
Guide the ground wire underneath the horn plate to the torx-screw location
^
Insert torx screw (1) from below steering wheel through wire connector and horn plate
^
Reconnect air bag electrical connector, then reinstall air bag unit
^
First tighten right torx screw, then the left.
Torque 10 +/- 2 Nm (7 ft-lbs)
^
Proceed to Section C
C.
Functional Check
^
Reconnect battery ground cable
CAUTION:
Ensure that no person is in vehicle when connecting battery ground cable
^
Turn ignition switch to ON position and check air bag warning light. Light should go out after 4 seconds - system is OK
^
Reset radio codes and preset radio stations
^
Program windows for "one-touch up/down" feature, where applicable
^
Set clock
^
Check sunroof operation and pre-select functions, where applicable
^
Check door/trunk lock function