Cabriolet V6-2.8L (AFC) (1995)
^
Remove cover (5) by inserting small screwdriver in slot (B) and releasing tab, then tilt cover down to release lower tab
^
Install ground wire (3), part number 4D0 419 149, using Phillips-head screw (4) located in steering wheel at right, lower corner of horn.plate
opening. The wire connector crimping must be upwards and visible to the technician
^
Remove horn-plate screws (2), left side of steering wheel only
^
Lift horn plate slightly; ensure that the washers and springs remain in position and slide ground-wire tab end (3) beneath the horn plate to
torx-screw location