Cabriolet V6-2.8L (AFC) (1995)
^
Apply loctite to threads of both horn-plate screws (2); insert screws and torque to 5 +/- 0.5 Nm (44 in-lbs)
^
Reinstall cover plate (5); ensure that it "snaps" properly into position at the top and bottom
^
Reconnect air bag electrical connection, then reinstall air bag unit
^
Install air bag-mounting screws (1) by hand; first tighten right torx screw, then the left. Torque 10 +/- 2 Nm (7 ft-lbs)
^
Proceed to Section C
Ground Connection Modification Procedure
Vehicles With A 3-Spoke Steering Wheel
CAUTION:
Always disconnect the battery ground (GND) cable before working on air bag or other related systems.
A.
Check Ground Connection
^
Record preset radio stations
^
Obtain radio code
^
Check system with the VAG 1551
^
DISCONNECT BATTERY GROUND CABLE AND COVER THE BATTERY TERMINAL