Cabriolet V6-2.8L (AFC) (1995)
-
Connect harness connector for brake fluid level sensor on brake fluid reservoir.
-
Remove hose clamps 3094 from supply and return hoses.
-
Connect vacuum hose on throttle body.
-
Connect both crankcase breather hoses to cylinder head cover.
-
Install strut tower crossmember.
Tighten to: 20 Nm (15 ft lbs)
-
Turn steering wheel several times from lock to lock (engine not running) to bleed air from steering gear.
NOTE:
If noises occur during the test drive, this procedure must be repeated.
^
Bleed brake system and check for leaks.
^
Connect battery Ground strap.
^
Check hydraulic oil level and top off if necessary
^
Check return hose on rotary valve housing for leaks.
^
Check pressure hose on steering gear housing for leaks.
^
Adjust toe.