Cabriolet V6-2.8L (AFC) (1995)
Fig. 5 Adjusting steering gear play
NOTE:
^
Two technicians are required to make the adjustment
^
Adjust with the engine not running and the vehicle standing on the ground.
^
Illustration shows the steering gear removed.
-
First Technician
-
Put wheels in straight ahead position.
-
Turn steering wheel back and forth (about 30— around center axis) and listen for rattling or knocking noise from steering gear.
-
Second technician:
-
Carefully turn adjusting screw (arrow in illustration) clockwise into cover, until rattling and knocking noise can no longer be heard from
inside vehicle.
-
Road test.
-
Repeat adjustment if necessary.
Fig. 6 Installation position of support ring
1 In illustration = Cap
2 In illustration = Support ring
3 In illustration = O-ring
SEAL IN ROTARY VALVE HOUSING, REPLACING
Fig. 1 Valve housing Seal, Removing
-
Drive seal out of housing.