audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Trunk / Liftgate > < Vehicle - Towing Procedures|Page 1600
Page 1
background image

Hood Shock / Support: Technical Service Bulletins
Gas Strut - Replacement

Group: 55

Number: 93-02

Date: March 31, 1993

Subject: 
Gas Strut Replacement

Model(s): 
All

All m.y.

Before replacing gas struts for hoods or trunk lids, observe the following:

^

A light oil film on the piston rod or a the seal is normal and needed for lubrication. DO NOT remove this oil film.

^

The lift force of the gas strut depends on the outside (ambient) air temperature. When temperatures are low, a higher force is normally needed to
operate the hood/trunk lid.

^

If one gas strut is faulty, it is not necessary to replace the struts in pairs. Always check struts individually and replace only the ones that are faulty.

^

Please inform customers if struts are not replaced after complaints. Functioning struts cannot be claimed under warranty.

Trunk / Liftgate > < Vehicle - Towing Procedures|Page 1600