Coupe GT L5-2226cc 2.22L SOHC (KX) (1986)
SPEED DISPLAY SENDER
Speed display sender, checking
Speed display sender, on transmission
PULSING VOLTAGE
Work sequence
PULSING VOLTAGE
-
connect US 1119 between contact 5 and ground switch ignition ON roll vehicle forwards or backwards and measure voltage
^
pulsing voltage 0.0 V to 5.0 to 0.0 V
If specified value is not obtained, - repair break in wiring according to wiring diagram OR
-
replace defective speed display sender
If specified value is still not obtained, replace instrument cluster