Coupe GT L5-2226cc 2.22L SOHC (KX) (1986)
-
to install, press mirror to base making sure fastening pins (arrows) fit into slot on clamping ring
Note
Insure that dust cover is properly fitted on mirror assembly.
-
tighten clamping ring until pin is centered over slot on mirror bottom
-
check mirror for proper function
Mirror glass replacement - electric
Housing 17089 - Audi 4000
CAUTION
Replacement mirror glass is supplied only with clamping ring. Check for notches at slot at bottom of mirror housing. If slots are seen, replacement
procedure is identical to electric mirror housing No. 17103.
Work sequence, first replacement
-
tape upper/lower edge of housing