Q5 Quattro V6-3.2L (CALB) (2009)
Security Lamp/Indicator: Service and Repair
Central Locking SAFE Indicator Lamp
Removing
-
Switch off ignition and remove ignition key.
-
Remove the front door trim.
-
Release the retaining clips - arrows -.
-
Remove the central locking LED - 1 - down and out of the door trim - 2 -.
Installing
Install in reverse order of removal, observing the following:
‹› The new central locking SAFE indicator lamp (K133 ) must be connected with the door trim wiring harness.
-
Disconnect the electrical wire and connect it with the new electrical wire for the central locking SAFE indicator lamp (K133).
-
Slide the central locking LED in until it engages audibly.
-
Install the front door trim.