Q5 Quattro V6-3.2L (CALB) (2009)
-
Switch lane change assistance calibration device (VAS 6350/4 ) on at power switch - 3 -.
‹› The green LED - 1 - must light up.
‹› If the red LED - 2 - lights up: Check lane change assistance calibration device (VAS 6350/4).
-
Follow further instructions on display of (VAS 5051B).
During the course of the program, a request is made to switch the lane change assistance calibration device (VAS 6350/4) from the left to the right
side of the Calibration Device (VAS 6350).
-
Switch lane change assistance calibration device (VAS 6350/4 ) off and move device.
‹› When installed correctly, vehicle electrical system voltage line must be connected at bottom left of calibration device (as seen in direction of
travel).
‹› Dimension - a - = 660 mm (measured from upper edge of calibration device to floor).
‹› Right setting = 703 mm (read on measurement scale - 1 -.