Q5 Quattro V6-3.2L (CALB) (2009)
Seat Memory Switch: Service and Repair
Driver Seat Memory Program Control Head
Removing
-
Switch off ignition and remove ignition key.
-
Remove the front door trim.
-
Disconnect the electrical connector - 4 -.
-
Release the hooks with a small screwdriver - arrows B -.
-
At the same time carefully open the retaining tabs - 1 - and - 2 - - arrows A -.
-
Remove the driver seat memory program control head (E97) - 3 - from the retainer - arrow C -.
Installing
Install in reverse order of removal, observing the following:
-
Press driver seat memory program control head ( E97) into the switch mount until the retaining hooks engage.
-
Install the front door trim.