Q5 Quattro V6-3.2L (CALB) (2009)
/Page-2684001.png)
Brake Intervention Sensor / Switch: Service and Repair
Brake Lamp Sensor
‹› After removing, the brake lamp sensor can be re-used.
‹› The brake light sensor programs itself. It is not necessary to calibrate it after installation.
Removing
-
Remove driver side storage compartment - 1 to 3 -.
-
Disconnect electrical connector to the footwell vent - C -.
-
Remove footwell vents - A and B -.
-
Disconnect electrical connector to the brake light sensor.
