Q5 Quattro V6-3.2L (CALB) (2009)
Steering Mounted Controls Assembly: Service and Repair
Steering Column Switch Module
Steering Column Switch Module
Removing
-
Adjust steering wheel downward and to rear as far as possible, use entire adjustment range of steering column adjustment for this.
-
Remove the driver airbag.
-
Remove steering wheel.
-
Remove steering column trim.
-
Remove bolt - 1 -.
-
Disconnect the electrical connector - 2 -.
CAUTION!
The technician must discharge static electricity before disconnecting the electrical connector - 3 -, for example by touching the door striker
pin.
-
Disconnect the electrical connector - 3 -.
-
Press catch - 1 - in - direction of arrow - until harness connector - 2 - disengages.
-
Remove the steering column switch module carefully.