Q5 Quattro V6-3.2L (CALB) (2009)
Rear Bumper Cover / Fascia: Service and Repair
Rear Bumper Cover
Rear Bumper Cover
Removing
-
Disconnect the electrical connector - 1 - on the parking aid control module, if applicable.
-
Free up the electrical wiring harness on the control module bracket - arrow - by disconnect the cable tie - 2 -.
-
Press the grommet - 3 - outward.
-
Remove the nuts - 3 - from the threaded pins on the cover - 1 -.
-
Remove the screws - 1 - on the upper cover and at the bottom of the spoiler.