Q5 Quattro V6-3.2L (CALB) (2009)
Dashboard / Instrument Panel: Service and Repair
MMI Screen
MMI Screen
Special tools, testers and auxiliary items required
‹› Trim removal wedge (3409)
Removing
-
Pry the MMI screen cover - 1 - out at the corners - arrow - using the trim removal wedge (3409) and remove it.
-
Disconnect the front passenger airbag disabled indicator lamp (K145)/emergency flasher button ( E229) electrical connector and remove the
cover.
Installing
Installation is reverse of removal, but note the following:
‹› Check the clips for damage or deformation and replace them if necessary.
-
Press the MMI screen cover on until it engages audibly.