Q5 Quattro V6-3.2L (CALB) (2009)
Dashboard / Instrument Panel: Service and Repair
Driver Side Instrument Panel Cover
Driver Side Instrument Panel Cover
Special tools, testers and auxiliary items required
‹› Trim removal wedge (3409)
Removing
-
Switch off all electrical consumers.
-
Remove ignition key.
-
Remove the side cover on the driver side instrument panel => [ Instrument Panel Side Cover ] See: Instrument Panel.
-
Unclip the instrument cluster gap cover from the instrument panel => [ Instrument Cluster Gap Cover ].
-
Remove the upper screws - 1 and 2 -.
-
Remove the lower screws - 4 and 5 -.
-
Unclip the top edge of the driver side instrument panel cover - 3 - from the instrument panel using a trim removal wedge (3409).
-
Disconnect the connectors on the light switch.
-
If equipped, headlamp adjuster (E102): disconnect the connector.
-
Unclip the 16-pin connector (T16) (Data Link Connector).
-
Versions with footwell lighting: Disconnect electrical connectors.
-
Disconnect the driver side instrument panel cover.
Installing