Q5 Quattro V6-3.2L (CALB) (2009)
/Page-2948002.png)
-
Remove the center defroster outlet air duct.
-
Remove the A/C unit bolt - 1 - on the instrument panel central tube top brace.
-
Remove the bolt - 2 - on the top brace on the instrument panel central tube.
-
Remove the ground wire and left ground point from the tunnel wall and free them up.
-
Disconnect the connectors on the accelerator pedal module and the brake light switch and free them up.
-
Remove the front right sill panel trim => [ Front Sill Panel Trim ] See: Service and Repair/Removal and Replacement.
-
Disconnect the connectors on the right A-pillar coupling station.
-
Disconnect the electrical connector on the fresh air blower and free up the wires.
-
Remove the air intake chamber bracket bolts - 1 - on the instrument panel central tube.
