Q5 Quattro V6-3.2L (CALB) (2009)
/Page-2978001.png)
Glove Compartment: Service and Repair
Glove Compartment Cover
Glove Compartment Cover
Removing
-
Remove glove compartment => [ Glove Compartment ].
-
Remove the hinge pin from the brake component.
-
Set the glove compartment down with the top side on a soft surface.
-
Drive the left and right hinge pins out using a 2 mm hex socket wrench - item 1 - (or another suitable tool) - arrow -.
-
Remove the glove compartment cover - 2 - from the compartment.
Installing
To install, perform the steps used in removal in reverse order.
