Q5 Quattro V6-3.2L (CALB) (2009)
Headliner: Service and Repair
Headliner
Headliner
Special tools, testers and auxiliary items required
‹› Pry lever (80 - 200)
Removing
CAUTION!
‹› Follow the safety precautions for pyrotechnic components, refer to => [ Safety Precautions ] See: Restraint Systems/Service
Precautions.
-
Fold the backrests forward.
-
Adjust the front seat backrest to a 45° angle
-
Remove the upper A-pillar trim => [ Upper A-Pillar Trim ] See: Service and Repair/Removal and Replacement.
-
Remove upper B-pillar trim => [ Upper B-Pillar Trim ] See: Service and Repair/Removal and Replacement.
-
Remove the C-pillar trim => [ C-Pillar Trim ] See: Service and Repair/Removal and Replacement.
-
Remove roof panel trim => [ Roof Panel Trim ].
-
Remove D-pillar trim => [ D-Pillar Trim ] See: Service and Repair/Removal and Replacement
-
Remove the partition grille mounts. Refer to => [ Partition Grille Mount ] See: Trim Panel/Service and Repair.
-
Remove sun visors => [ Sun Visor ].
-
Remove the front interior lamps/reading lamps.
-
Remove the sun visor center bracket => [ Sun Visor Center Bracket ].
-
Remove the roof grab handle => [ Roof Grab Handle ].
With sunroof:
-
Open the sunroof - 1 - all the way.
-
Open the sun shade - 2 - about 2/ 3.
-
Clean Pry Lever (80 - 200) to avoid soiling headliner.