Q5 Quattro V6-3.2L (CALB) (2009)
![background image](/audi/q5_quattro/v6-3.2l_(calb)/Page-3022001.png)
Utility Storage Compartment: Service and Repair
Instrument Cluster Gap Cover
Instrument Cluster Gap Cover
Special tools, testers and auxiliary items required
‹› Trim removal wedge (3409)
Removing
-
Move the steering wheel as far down as possible using the whole steering column adjusting range.
-
Unclip the instrument panel gap cover - 1 - from the instrument panel - A arrows - using a trim removal wedge (3409).
-
Using a flat-head screwdriver, carefully unclip the gap cover from the steering column switch module upper trim - arrow B -.
Installing
Installation is reverse of removal, but note the following:
-
Press the gap cover on until the clips engage completely in the mounting points.