Q5 Quattro V6-3.2L (CALB) (2009)
-
Remove the cable ends - 1 - from the motor support - 2 -.
-
Pry the motor support - 1 - out of the frame - 3 - with a screwdriver.
Installation is the reverse of removal.
‹› Do not lubricate the sun shade slide cables and motor support.
-
Install the sunroof motor. Refer to => [ Power Sunroof Control Module ] See: Sunroof / Moonroof Module/Service and Repair/Power Sunroof
Control Module.
-
Install the frame. Refer to => [ Assembly Frame Assembly Overview ] See: Sunroof / Moonroof Frame/Service and Repair/Assembly Frame
Assembly Overview.
-
After completing the work procedure, perform an adaptation on the sun shade motor. Refer to => [ Sunroof Adaptation ] See: Testing and
Inspection.