Q5 Quattro V6-3.2L (CALB) (2009)
/Page-3102001.png)
Sunroof / Moonroof Windguard: Service and Repair
Wind Deflector Bearing
Wind Deflector Bearing
Removing
-
Remove the wind deflector. Refer to => [ Wind Deflector ] See: Wind Deflector.
-
Remove the mounting pin - 2 - from the upper screen frame - 1 - and the wind deflector bearing - 3 -.
-
Remove the wind deflector bearing - 1 - in - direction of arrow - from the upper screen frame - 5 -.
-
Remove the tensioning wire - 2 - from the lower screen frame - 4 - and from the screen - 3 -.
Installation
-
Insert the tensioning wire - 2 - through the screen - 3 - and into the lower screen frame - 4 -.
