Q5 Quattro V6-3.2L (CALB) (2009)
-
Install and tighten bolt - 11 -.
Clip the brake pedal to the brake booster.
-
Hold ball head of push rod in front of mounting and push brake pedal in direction of brake booster, so the ball head locates audibly.
-
Install brake lamp sensor. Refer to => [ Brake Lamp Sensor ] See: Power Brake Assist/Brake Intervention Sensor / Switch/Service and Repair.
-
Install footwell vents - A and B -.
-
Tighten footwell vent bolt - A -.