Q5 Quattro V6-3.2L (CALB) (2009)
‹› The request to enter a display group number appears in display field - 1 -.
‹› An entry keypad is shown in display field - 2 -.
-
Using entry keypad, enter in display field - 2 - the " 006" for the display group number and confirm by pressing the " Q button" (guide pistons
together).
-
To exit the entry template, press the green Arrow button at the lower left.
‹› DTC memory interrogated, errors shown corrected and DTC memory erased.
-
Disconnect the vehicle diagnostic, test and information system (VAS 5051B) or (VAS 5052) from the 16-pin Data Link Connector (DLC) in the
vehicle with the ignition switched off.