Q5 Quattro V6-3.2L (CALB) (2009)
Brake Pad: Service and Repair
Front Brake Pads
Front Brake Pads
‹› Always replace on both axles.
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1331)
‹› Reversible ratchet (V.A.G. 1331/1)
‹› Piston resetting tool (T10145)
Removing
CAUTION!
The 4 retaining pins for the brake pads on the brake carrier must not be loosened under any circumstances.
-
Raise vehicle.
-
Remove wheels.
‹› When removing, mark brake pads that will be used again. Install in the same position, otherwise braking effect will be uneven!
-
Free up the brake hose on the bracket - 4 -.
-
Release electrical wire from the bracket - 2 - toward the left - A - and remove.
CAUTION!
The four retaining pins for the brake pads in the brake caliper must not be loosened under any circumstances.
-
Press retaining spring - 8 - in the center.