Q5 Quattro V6-3.2L (CALB) (2009)
Coolant Line/Hose: Service and Repair
Front Coolant Pipe
Front Coolant Pipe
Special tools, testers and auxiliary items required
‹› Spanner wrench (3212)
‹› Hose clamp pliers (V.A.G 1921)
‹› Hose clamp pliers (VAS 6340)
Removing
-
Drain coolant. Refer to => [ Cooling System, Draining and Filling ] See: Service and Repair/Procedures or remove the after-run coolant pump
(V51) ( V51) if applicable => [ After-Run Coolant Pump ] See: After-Run Coolant Pump/Service and Repair/After-Run Coolant Pump.
-
Remove air duct - arrows -.
-
Remove ribbed belt. Refer to => [ Ribbed Belt ] See: Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and
Repair/Ribbed Belt.
-
Remove bolts for the coolant pump ribbed belt pulley, using a spanner wrench (3212) to counterhold.
-
Remove left front wheel.
-
Remove left front wheel housing liner. Refer to =>