Q5 Quattro V6-3.2L (CALB) (2009)
‹› Lay a cloth below the coolant pipe to catch escaping coolant.
-
Open clamp - 2 - and remove coolant hose form the coolant pipe.
-
Remove bolt - 1 - and remove coolant pipe back out of the cylinder block - arrow -.
Installing
‹› Tightening specifications. Refer to => [ Coolant Pipes Assembly Overview ] See: Coolant Pipes Assembly Overview.
Installation is in reverse order of removal, note the following:
‹› Replace O-rings.
-
Clean and smooth O-ring sealing surface.
-
Coat O-ring with coolant and slide it onto the coolant pipe.
-
Connect coolant hose with connector coupling => [ Connect coolant hose with the connector coupling ] See: Radiator/Service and Repair/Radiator
and Coolant Fan Assembly Overview