Q5 Quattro V6-3.2L (CALB) (2009)
‹› Not with the 400 W fan activation
‹› Removing and installing, refer to => [ Coolant Fan ] See: Radiator Cooling Fan/Service and Repair/Coolant Fan
23
Bolt
‹› 5 Nm
Connect coolant hose with the connector coupling
-
Remove old O-ring - 2 - in coolant hose - 3 -.
-
Coat new O-ring with coolant and install it in the coolant hose.
-
Press coolant hose onto the connection - 1 - until it engages audibly.
-
Press coolant hose on again and pull to make sure the connection is engaged correctly.