Q5 Quattro V6-3.2L (CALB) (2009)
Engine - Coolant Temperature Sensor/Switch: Service and Repair
Engine Coolant Temperature Sensor
Removing
‹› Engine cold.
-
Quickly open the coolant reservoir cap and release any remaining pressure in the cooling system and then close it again.
-
Remove front engine cover - bottom arrows -.
-
Disconnect electrical connector - 2 -.
‹› Lay a cloth below to catch escaping coolant.
-
Remove retaining clip - 1 - and Engine Coolant Temperature (ECT) Sensor (G62).
Installing