Q5 Quattro V6-3.2L (CALB) (2009)
-
Clean sealing surfaces; they must be free of oil and grease.
‹› Note the expiration date of the sealing compound.
-
Cut tube nozzle at the front marking (nozzle diameter approximately 1.5 mm).
CAUTION!
The lubrication system could be plugged with excess sealant.
‹› Do not apply sealant bead thicker than indicated.
-
Apply sealant bead - arrow - to the clean sealing surface on the ribbed belt side sealing flange as shown in the illustration.