Q5 Quattro V6-3.2L (CALB) (2009)
6
Idler roller for ribbed belt
‹› 40 Nm
7
Bolt
‹› Tightening specifications => [ (Item 2) Bolt ] See: Water Pump/Service and Repair/Coolant Pump, Coolant Thermostat and Connecting Piece
Assembly Overview
8
Ribbed belt pulley for coolant pump
9
Bolt
‹› Tightening specifications => [ (Item 1) Bolt ] See: Water Pump/Service and Repair/Coolant Pump, Coolant Thermostat and Connecting Piece
Assembly Overview
10
Coolant pump
‹› Removing and installing, refer to => [ Coolant Pump ] See: Water Pump/Service and Repair/Coolant Pump
11
Bolt
‹› Tightening specifications.
12
Bolt
13
Power steering pump bracket
14
Slide bushing
15
Bolt
16
Bolt
17
Power-steering pump
18
Power steering pump ribbed belt pulley
19
Bolt
20
Tensioning element for ribbed belt
‹› Removing and installing, refer to => [ Ribbed Belt Tensioner ] See: Drive Belt Tensioner/Service and Repair
‹› 40 Nm
21
Bracket for air conditioning compressor
‹› Be careful of the alignment bushings when installing
22
Bolt
‹› 20 Nm
23
A/C Compressor
‹› Do not remove or disconnect refrigerant lines
‹› Be careful of the alignment sleeves - 25 - when installing
24
Bolt
‹› Tightening specifications.
25
Alignment bushing