Q5 Quattro V6-3.2L (CALB) (2009)
/Page-728002.png)
‹› Lift out with screwdriver to replace
‹› Press in by hand
7
Ball pin
‹› 2.5 Nm
8
Intake manifold upper section
‹› Removing and installing, refer to => [ Intake Manifold, Upper Section ] See: Intake Manifold, Upper Section
9
Seal
‹› Replace
10
Throttle valve control module (J338)
11
Bracket
12
Bolt
‹› 6 Nm
13
Evaporative Emission (EVAP) Canister Purge Regulator Valve (N80)
14
Hose
15
Bolt
‹› 3 Nm
16
Intake Air Temperature (IAT) Sensor (G42)/Manifold Absolute Pressure (MAP) Sensor (G71)
17
O-ring
‹› Replace
18
Bolt
‹› 2.5 Nm
19
Hose for crankcase ventilation
20
O-ring
‹› Replace
21
Bolt
‹› 8 Nm
22
Washer
23
Sleeve
24
Seals
‹› Replace
25
Seal
‹› Replace if damaged
‹› Lift out with screwdriver to replace
