Q5 Quattro V6-3.2L (CALB) (2009)
Timing Cover: Service and Repair
Lower Timing Chain Cover
Lower Timing Chain Cover
Special tools, testers and auxiliary items required
‹› Hand drill with plastic brush attachment
‹› Protective eye-wear
Removing
‹› Transmission removed.
‹› During installation, all cable ties must be re-installed at the same location.
CAUTION!
Risk of destroying electrical components.
‹› Observe measures when disconnecting battery.
-
Disconnect battery.
-
Remove drive plate. Refer to => [ Drive Plate ] See: Transmission and Drivetrain/Flex Plate/Service and Repair/Drive Plate.
-
Remove left and right timing chain covers. Refer to => [ Left and Right Timing Chain Covers ] See: Left and Right Timing Chain Covers.
-
Remove oil filter housing. Refer to => [ Oil Filter Housing ] See: Engine Lubrication/Oil Cooler/Service and Repair/Oil Filter Housing.
-
Remove generator.
-
Remove left and right bolts - arrows - and electrical connector bracket.
‹› Ignore items - 1 to 4 -.
-
Disconnect starter electrical connector - 3 - by sliding the retainer back and pressing the release down.