Q5 Quattro V6-3.2L (CALB) (2009)
/Page-829002.png)
-
Remove nuts - 1 - and - 8 - and heat shield bracket.
-
Remove nuts - 2 through 7 - and - 9 - and remove the exhaust manifold.
Installing
Installation is in reverse order of removal, note the following:
‹› Replace the seal and self-locking nuts.
-
Position exhaust manifold with the catalytic converter seal and tighten nuts => [ Left exhaust manifold, tightening specifications
and sequence ] See: Exhaust Manifold Assembly Overview
